Instructions / Assembly

3
200067-03
OPERATION
Note: When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
Least Sensitive Most Sensitive
The sensor is less sensitive to motion directly
towards it and more sensitive to motion across
coverage area.
Motion
Motion
Sensor
Maximum Range Coverage Angle*
(Top View)
360°
30 Feet (9.1 m)
in all Directions
* Without lens shield installed.
Sensor Height
5 ft. (1.5 m)
Mode: On-Time Works: Day Night
Test
5 Seconds x x
Auto
1, 5, or 10 min x
DualBrite
®
Off, 3, 6 Hr,
to Dawn
x
Manual
Until Dawn* x
6. Set the amount of ON-TIME you want the light
to stay on after motion is detected (1, 5, or 10
minutes).
7. Set the amount of time you want the light to
stay on in the DualBrite
®
mode (Off, 3 hours,
6 hours, or dusk-to-dawn).
MANUAL MODE
AUTO
TEST
ON-TIME Switch at 1, 5,
or 10 minutes
... back on.
1 Second
OFF then...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1, 5,
or 10 position.
MODE SWITCHING SUMMARY
Flip light switch
off for one second
then back on*
* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the AUTO
mode.
MANUAL MODE