Instructions / Assembly

6
205072-02
Note:
1


minutes
for the circuitry to calibrate.

OPERATION
MANUAL MODE
4.      
decrease the range as needed. Too much sen-
sitivity may cause false triggering due to heat
sources in the coverage area (see Adjustment
of Coverage Area or Troubleshooting section).
 
light to stay on after motion is detected (1, 5,
or 10 minutes).
6. Set the 

Mode: On-Time Works: Day Night
Test
5 Seconds x x
Auto
1, 5, or 10
Minutes
x
Accent
3, 6 Hour,

x
Manual
 x
... back on.
1 Second
OFF then...
    
night because daylight returns


second then back on to toggle




5, or 10 position.
30 ft.
(9.1 m)
6 ft.
(1.8 m)
180°
Maximum
Maximum Range Coverage Angle*
(Top View)
Least Sensitive Most Sensitive
e sensor is less sensitive to motion directly

coverage area.
Sensor
Motion Motion