Instructions / Assembly

2
205071-02
WARNING: Turn power o at circuit
breaker or fuse. Place tape over circuit
breaker switch and verify power is o at
the xture.
Sensitivity Control
Wire Path Ground Screw
Mounting
Plate
INSTALLATION
Decorative Nut
Mounting Screw
Bracket
Mounting
Screw
Mounting
Plate
Junction
Box
Note:

      

the majority of junction box applications.


      
the mounting plate. Note:

 
on mounting plate (See Recommended Ground-
ing Method for additional information).
3. Flip the mounting plate over.
 
is on the upper right. Note:


xture to pass through.
 -
tach the mounting plate to the junction box

Wire Path Wire Path
Fixture Screws
Ground Screw
As Shipped Flipped and
Rotated



 
 

For best performance, mount the xture about 6
feet (1.8 m) above the ground.
 
 
 
mounting plate.
 
5. Set sensitivity (SENS) control on back of
xture to mid-position.
MAX
MIN
SENS