Specification Sheet

3209177-02
Mounting
Bracket
Mounting
Bracket
LIGHT FIXTURE INSTALLATION
For best performance, mount the xture about 6 feet (1.8m)
above the ground.
1. Remove two decorative nuts.
2. Remove mounting bracket.
3. Tighten mounting screws nger tight.
4. Attach mounting bracket to junction box.
Decorative Nut
Mounting Screw
Note: We recommend having an assistant help hold the
lantern assembly during the wiring process.
GND
Ground Screw
Bracket
Mounting
Screws
Junction
Box
WIRING THE LIGHT FIXTURE
CAUTION: DO NOT connect the RED wire
unless you want to control other lights from the
motion sensor (see Optional Wiring).
Note: All wiring must be run in accordance with the Na-
tional Electrical Code through conduit or another accept-
able means. Contact a qualied electrician if there is any
question as to the suitability of the system.
WARNING: Turn power o at circuit breaker
or fuse.
One Motion Light
Two Motion Lights
Black
White
Green
or Bare
Copper
Green
or Bare
Copper
Light
Fixture
Black
White
Light
Fixture
Light
Fixture