Installation and Operation Manual

Controls,Indicators,andConnections3

059049-00 Rev. 'HeatͲTimerCorp.

Controls,Indicators,andConnections

Figure1: WirelessSpaceSensorControls,Indicators,andConnections

Item Description Item Description

1ModeButton

UsetosettheWirelessSNRmode(Normal,Install,or

OnePacket).

4InternalAnte nna

2 StatusIndicators(LEDs)

•Red“main”LEDblinkswheninInstallmode.

• Green“main”LEDblinkswhendatareceptionbya

destinationdevicehasbeenacknowledged.

•Red“RF”LED(nearesttheRFModule)blinkswhen

transmittingdatainInstallmode

orifOnePacket

modehasbeeninitiated.

IfallthreeLEDsar eblinking,noSystemIDhasbeen

configured.

5Batteries

ProvidepowerfortheWirelessSNR(2)AA1.5Valkaline

batteries.

3RFModule

Transmit/receiveradiosignalsto/fromotherdevices.

6 RS485Connector

ProgramminginterfacefortheWirelessProgrammeror

MSIHub.