user manual

Service Manual 55

Troubleshooting Guide

■ Error Indicator

• The function is to self-diagnoisis airconditioner and express the troubles identifically if there is any trouble.

• Error mark is ON/OFF for the operation LED of evaporator body in the same manner as the following table.

• If more than two troubles occur simultaneously, primarily the highest trouble fo error code is expressed.

• After error occurrence, if error is released, error LED is also released simultaneously.

• To operate again on the occurrence of error code, be sure to turn off the power and then turn on.

• Having or not of error code is different from Model.

Self-diagnosis Function

00 No Error ON

01 Indoor Room Thermistor Error 1 time OFF

02 Indoor In-Piping Error 2 times OFF

05 Communication Error between In and Out 5 times OFF

06 Indoor Out-Piping Error 6 times OFF

07 Differnt mode operation 7 times OFF

10 Indoor fan motor locked error 1 times OFF

Error code Description MPS Variable LED1 LED2 Indoor Status

33 D-Pipe High(Normal) 3 times 3 times OFF

44 Outdoor Air Thermistor Error(Open/Short) 4 times 4 times OFF

45 Cond Pipe Thermistor Error(Open/Short) 4 times 5 times OFF

Const. D-Pipe Thermistor Error(Open/Short)

4 times 7 times OFF

51 Capcity Error(High/Low)

5 times 1 times OFF

Error code Description MPS Variable LED1(Red) LED2(Green) Indoor Status

Indoor Error

Outdoor Error

LED1

LED2