Owner's Manual

9
Heat Controller DVC/DVH Remote Controller
AUTO OPERATION
1.PresstheMODEbuttontoselectAuto.
2.PresstheUP/DOWNbuttontosetthedesired
temperature.Thetemperaturecanbesetwithina
rangeof62°F~86°Fin1°Fincrements.
• InAutomode,theunitwillautomaticallyselect
Cool,FanorHeat*modesbesensingthe
differencebetweentheactualambientroom
temperatureandthesettemperatureontheremote
controller.
• IntheAutomode,youcannotchargethefan
speed.Itisbeingautomaticallycontrolled.
COOLING/HEATING/FAN OPERATION
IfAutomodeisuncomfortable,youcanmanually
overridethesettingbyputtingtheunitinCOOL,HEAT*,
orFAN**ONLYmode.
1.PresstheMODEbuttontoselectCOOL,HEAT*
(pump)orFAN**mode.
2.PressthetempUP/DOWNbuttontosetthedesired
temperature.Thetemperaturecanbesetwithina
rangeof62°F~86°Fin1°Fincrements.
3.PresstheFANbuttontoselectthefanspeedinfour
steps-Auto,Low,Med,orHigh.
NOTE
* Heat mode is applicable to heat pump models only.
** In the FAN mode, the set temperature is not
displayed on the remote controller and you are not
able to control the room temperature either. In this
case, only the fan speed can be changed.
Remote Operation