Product Manual

7
ASSEMBLY INSTRUCTION
1. Installing the Seat (#2)
(Fig 2) (Fig 3)
Slide the seat (#2) into the Connection points (both sides) in the Main frame (#1)(See
Fig2), put down the seat and connect the front connection point and make sure that
tighten the tension knob in the front connection point. (See Fig3).
2.Installing the Armrest Frame
I
nsert the armrest frame (with left-#5 and Right-#4 each) into the seat frame (See Fig
4), then use the tension knob to lock the armrest. (See Fig 5)
(Fig 4) (Fig 5)
3. Installing controller and connect cables
Assemble the controller (#3) on right armrest (#6) bracket with 2 screws.(See Fig
6)There is one plug (4 pins) in the other end on the controller. Please connect the 4
pins plug with mainframe (#1) and make sure they are tightly connected.(See Fig 7)
Armrest Frame
Tension
knob
Connection point
Front
Connection
Point