8'x10 Granbury Instructions

24-1/2"
(62,2 cm)
24-1/2"
(62,2 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
12"
(30,5 cm)
6" (15,2 cm)
36
Two Nails
Keep spacing between the
center of the rafters at the lower
edge of the panel and secure
using (1) 2" nail into each rafter
(Fig. E).
Move to the top of the panel
and keep spacing between the
center of the rafters. Secure
using (1) 2" nail into each rafter
(Fig. E).
Fig. E
7/16 x 7-7/8 x 96"
(1,1 x 20 x 243,8 cm)
x1
ROOF PANELS
2" (5,1 cm)
PARTS REQUIRED:
x10
Place the 7-7/8" x 96" roof panel ush to the upper
panel and with a 1/2" measurement at the gable trim
(Fig. G).
Secure panel using 2" nails 6" apart.
3
4
5
Secure the roof panel using 2" nails
6" apart on edges and 12" apart
inside panel (Fig. F).
NOTE: Measurement from outside of trim.
Fig. F
1/2"
(1,3 cm)
Flush
Fig. G
Gable
Trim
7-7/8 x 96"
Flush