Installation Guide

9"
(22,9 cm)
35
ROOF PANELS
PARTSREQUIRED:
x4
2" (5,1 cm)
11-7/8x96"
(30,2x244cm)
7/16 x 11-7/8 x 96"
(1,1 x 30,2 x 244 cm)
x1
7/16 x 11-7/8 x 60 -1/4"
(1,1 x 30,2 x 152,7 cm)
x1
11-7/8x60-1/4"
(30,2x152,7cm)
Roofpanelsmaycauseseriousinjuryuntilsecurelyfastened.
1
BEGIN
Place the 11-7/8x96"lower roof panel with the rough side up (painted-grid lines side) with 2-7/8"
overhang from back wall panel (FigA). Ensure the panel measures 3/4" (1,9 cm) along the length
of the rafter(Fig.B).
Secure panel with 2" nails as shown.
DOOR
DOOR
Place the 11-7/8x60-1/4"lower roof panel with the rough side up ush to installed 11-7/8x96"panel.
Ensure the 11-7/8x60-1/4"roof panel measures 2-7/8" (8,3 cm) overhanging back wall panel (FigB) and is
also ush with installed panel (FigC).
Secure panel with 2" nails as shown.
2
Flush
Fig.C
2-7/8"
(8,3 cm)
2-7/8"
(8,3 cm)
2-7/8"
(8,3 cm)
2-7/8"
(8,3 cm)
Fig.A
NOTE: Measurement from back wall panel.
3/4"
(1,9 cm)
Fig.B
Gauge
Block
Flush
2-7/8"
(8,3 cm)
Fig.B
NOTE: Measurement from back wall panel.
9"
(22,9 cm)
Measureup9"and
snapachalkline.