Installation Guide

30
PARTSREQUIRED:
SIDE WALL PANELS (continued)
x16
2" (5,1 cm)
x45
1-1/2" (3,8 cm)
Fig.A
2"(5,1cm)
Nails
1-1/2"(3,2cm)
Nails
1-1/2"(3,2cm)
Nails
1-1/2"(3,2cm)
Nails
6"
(15,2 cm)
6"
(15,2 cm)
6"
(15,2 cm)
6"
(15,2 cm)
2"(5,1cm)
Nail
Remove temporary ledger OO.
5
Place 48x84" panel onto side wall  ush with bottom of 42x96" panel with primed side up, as shown. Secure
panel with 2" nails in three corners (Fig.E). Ensure the measurement between the panel edges are the same
along the entire length (Fig.B). Angle nails to hit  oor frame (Fig.C).
4
Fig.E
Primed
side up
Fig.C
Fig.B
1-1/2"Nails
2" Nail
Flush
Flush
42"
(106,7 cm)
Same
Measurement
6
Nail lower edge of panel to  oor using 2" nails 6" apart. Angle nail to hit  oor frame (Fig.A).
Nail side wall panels to rafter and wall studs using 1-1/2" nails 6" apart as shown.
7
Repeat Steps1-7 to attach the opposite side panels.
8
You have  nished installing your side panels. Proceed to install SIDE WALL STUDS.
FINISH
9
OO