Installation Guide

71
CORNER TRIM
PARTS REQUIRED:
x48
2" (5,1 cm)
BEGIN
¸
1
FINISH
4
Position 82-1/2" trim board  ush along edge of 81-7/8" trim board and  ush under
gable panel (Fig. A, B). Secure using one 2"  nish nail at top as shown.
Attach one 81-7/8" trim board  ush under sof t panel and against eave wall (Fig. A, B) using
one 2"  nish nail at top as shown.
Repeat Steps 1-2 to attach trim to all four corners.
Finish attaching trim  ush to corners (Fig. B) using six 2" (5,1 cm)  nish nails as shown.
You have attached your corner trim.
3
2
81-7/8"
(208 cm)
81-7/8"
(208 cm)
81-7/8"
(208 cm)
on eave
walls
82-1/2"
(209,6 cm)
on gable
wall
82-1/2"
(209,6 cm)
x4
3/8 x 1-3/4 x 82-1/2" (1 x 4,4 x 209,6 cm)
x4
3/8 x 1-3/4 x 81-7/8" (1 x 4,4 x 208 cm)
Fig. B
Fig. A
82-1/2"
(209,6 cm)
Flush under gable panel.
DOOR
DOOR
81-7/8"
(208 cm)
Flush under gable panel.
82-1/2"
(209,6 cm)
82-1/2"
(209,6 cm)
81-7/8"
(208 cm)
Seam is  ush. Caulk seam
before painting trim.