Installation Guide

47
DOOR
Toe-screw from inside.
3" (7,6 cm)
PARTS REQUIRED:
RAFTERS
x5
x30
FINISH
5
Place remaining rafters on top plate, aligned over studs as shown and secure with 3" screws (Fig. C).
Secure rafter to top plate with one 3" screw from under top plate (Fig. B, C).
Continue securing rafter to top plate with two 3" screws above notch (Fig. B, C).
You have  nished attaching your RAFTERS.
4
BEGIN
¸
1
Align over studs.
Locate  rst rafter on top plate, aligned over studs at each side and tight to side wall (Fig. A, Fig B).
Rest notch on top plate.
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24-3/8"
(61,9) cm)
24-3/8"
(61,9) cm)
MEASUREMENTS ARE TO CENTER OF RAFTER
Preassembled Rafter
2
3
BEGIN
HERE
Fig. B
Fig. C
(3) 3" (7,6 cm)
Screws
Tight to side wall
Tight to side wall
(3) 3" (7,6 cm)
Screws
Toe-screw from inside.
Fig. A