Installation Guide

44
GABLE LADDERS
PARTS REQUIRED:
Fig. C
75-1/4"
(191,1 cm)
3-1/2"
(8,9 cm)
47-1/4"
(120 cm)
23-1/4"
(59,1 cm)
3"
(7,6 cm)
Screws
3"
(7,6 cm)
Screws
ECA
ECA
CLA x4
Arrange, measure and mark locations of four CLA as shown place ECA
on top. Secure using 3" screws as shown (Fig. A). Ensure parts are
ush along edges.
2
3
4
6
5
1
BEGIN
Orient parts as shown (Fig. A).
You will build FOUR assemblies (Fig. B).
x8
2 x 4 x 75-1/4" (5,1 x 10,2 x 191,1 cm)
ECA
x16
2 x 4 x 4-7/8" (5,1 x 10,2 x 12,4 cm)
CLA
3" (7,6 cm)
x64
Fig. B
x4
Fig. A
Flush
Flush
Flush
Flush
Flush
3"
(7,6 cm)
Screws
Flip over gable ladder sub-assembly and attach ECA to four CLA using 3" screws (Fig. C).
Repeat STEPS 2-3 to build three additional gable ladder sub-assemblies.
Repeat STEP 5 to build the other gable ladder.
To complete gable ladder, toe-screw two sub-assemblies together using
3" screws (Fig. D).
Fig. D