Installation Guide

36
PARTS REQUIRED:
GABLE END WALL
x90
2" (5,1 cm)
You have  nished building your gable end wall.
FINISH
8
7
Carefully  ip the gable wall over.
23-7/8 x 84"
(60,6 x 213,4 cm)
x1
48 x 84"
(122 x 213,4 cm)
x1
Flush
Maintain
Flush
Flush
For squareness maintain  ush
along panel edges.
48"
(122 cm)
23-7/8"
(60,6 cm)
12"
(30,5 cm)
6"
(15,2 cm)
Flush
Place 23-7/8" x 84" primed side up and  ush with installed 48" x 84" panel edge. Ensure panel is
 ush at top. Secure using 2" (5,1 cm) nails 6" (15,2 cm) apart on edges.
Place 48" x 84" primed side up and  ush with installed 23-7/8" x 84" panel edge. Ensure panel is  ush at
top. Secure using 2" (5,1 cm) nails 6" (15,2 cm) apart on edges and 12" (30,5 cm) apart on inside of panel.
5
6