10x12 Hillsdale Instructions

1 x 3 x 5" (2,5 x 7,6 x 12,7 cm)
x1
GAA
56
Orient parts as shown on at surface. 3/8" offset is to top. Look for red
(right) and green (left) on hinge board.
BEGIN
1
2
3
Attach temporary support OO with 3" screws in middle and at ends as shown.
Tighten securely.
Attach temporary support GAA with two 1-1/4" screws as shown.
Tighten securely.
OO
GAA
Tighten screws
securely.
OFFSET
(4) 3" (7,6 cm)
Screws
Screws
1-1/4" (3 cm)
Bottom edges ush.
NOTE:
Screw hole
will be
used later.
3/8"
(1 cm)
3/8"
(1 cm)
3/8"
(1 cm)
3/8"
(1 cm)
OFFSET
GREEN
RED
3/4"
(1,9 cm)
23-1/2"
(59,7 cm)
23-1/2"
(59,7 cm)
3/4"
(1,9 cm)
PARTS REQUIRED:
x1x1
Left Door Right Door
DOUBLE DOORS - GABLE WALL
HINT:
Look for 3/8" SPACER
attached to doors.
3" (7,6 cm)
OO
x1
1-1/4 x 2-1/2 x 69" (3,2 x 6,3 x 175,3 cm)
1-1/4" (3,2 cm)
x2
x4
IMPORTANT!
USE DOORS WITH
HINGE BOARD ENDS PAINTED
GREEN AND RED
SPACER
HIN T:
Use 3/8" SPACERS
to separate doors.