10x12 Hillsdale Instructions

55
EAVE SIDE FASCIA
x32
2" (5,1 cm)
2
Position two 4-3/4" x 80-5/8" fascia boards with primed side out,  ush with roof panels and gable
fascia as shown (Fig. A). Secure using 2"  nish nails into rafter ends.
Repeat Step 1 on opposite eave.
You have  nished installing your eave side fascia.
FINISH
3
1
BEGIN
PARTS REQUIRED:
x4
3/8 x 4-3/4 x 80-5/8" (1 x 12,1 x 204,8 cm)
Primed Side Out
Flush with
roof panel.
Flush at
middle rafter.
2" (5,1 cm) Finish Nails
x8 per fascia board
Fig.A
Flush
Flush
TOENAILING