10x12 Hillsdale Instructions

50
PARTS REQUIRED:
ROOF PANELS
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
3/4"
(1,9 cm)
Gauge
Block
Fig. A
Flush
Flush
2" Nails
Place 27-1/4" x 48" upper roof
panels centered and ush to
lower panel.
Ensure 3/4" measurement on
the rafters (Fig. A).
Secure the lower edge of roof
panels using two 2" nails in
corners as shown.
Move up to the top of the panel
and keep spacing between the
center of the rafters (Fig. F).
Secure panels with one 2" nail
into each rafter.
Place 32-5/8" x 48" upper roof
panel ush with the installed
panels.
Secure the edges of panel
using 2" nails 6" apart along
edges as shown.
Repeat STEP - 6 for 2nd
32-5/8" x 48" roof panel.
5
6
7
Flush
Flush
Flush
Flush
32-5/8"x 48"
32-5/8"x 48"
27-1/4"x 48"
27-1/4"x 48"
MAINTAIN RAFTER TO RAFTER DIMENSION
Fig. F
Two Nails