Liberty Instructions
A
B
C
4"
(10 cm)
3-1/2"
(8,9 cm)
D
D
7
CONCRETE FOUNDATION
If you choose to install your kit on a concrete slab refer to the diagram below.
Attach the sill plates on the foundaton as shown, and continue on to page 21.
A B C DActual Floor SizeBuildingSize
• A treated 2 x 4" (5 x 10 cm) sill plate is required when installing your shed on concrete.
Purchasefulllengthtreatedlumber,orbuttshorterpiecesend-to-endandsealseamswithcaulk.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4" (5 x 10 cm) sill plates to slab using approved concrete anchors (fastenersnotincluded).
• Check local code for concrete foundation requirements.
120"(305cm)
120"(305cm)
120"(305cm)
85-5/8"(217cm)
133-5/8"(339cm)
181-5/8"(461cm)
10'x7'-8-5/8"(305x235cm)
10'x11'-8-5/8"(305x357cm)
10'x15'-8-5/8"(305x479cm)
10'x8'(305x244cm)
10'x12'(305x366cm)
10'x16'(305x488cm)
92-5/8"(235cm) 151-1/2"(385cm)
140-5/8"(357cm) 185"(470cm)
188-5/8"(479cm) 224"(568cm)
Treated Sill Plate
Caulk between
sill plate and
concrete.
10'x8'BuildingRequires:
10'x12'BuildingRequires:
10'x16'BuildingRequires:
2 x 4 x10' (5 x 10 x 305 cm)
x2
2 x 4 x10' (5 x 10 x 305 cm)
x2
2 x 4 x10' (5 x 10 x 305 cm)
x2
2 x 4 x 8' (5 x 10 x 244 cm)
x2
2 x 4 x 8' (5 x 10 x 244 cm)
x2
2 x 4 x 4' (5 x 10 x 122 cm)
x2
2 x 4 x 8' (5 x 10 x 244 cm)
x2
2 x 4 x 8' (5 x 10 x 244 cm)
x2
MUST be treated lumber.
Caulk
x1 or 2
Allow new concrete slabs to cure for at least seven (7) days.