Liberty Instructions

22-1/4"
(56,5 cm)
22-1/4"
(56,5 cm)
24"
(61 cm)
24"
(61 cm)
54
RAFTERS
3" (7,6 cm)
FINISH
4
Locate rafters directly over studs and  ush to overhang in wall frame (Fig.A).
Check that you have the measurements shown. Screw through sof t panel into
rafters using one 2" screw (Fig.A).
Repeat steps to attach three rafters.
Attach with two 3" screws at each end (Fig.B). Re-tighten 2" screws if neccessary.
You have attached your rafters.
Flush
3
2
BEGIN
¸
1
PARTS REQUIRED:
pre-assembled
x3
x12
x6
Screw into top
plate.
Alignoverstuds.
Maintain the measurements between rafters.
2" (5 cm)
2"(5cm)
Screw
Fig.A
1" (2,5 cm)
Fig.B
DOOR
NOTE: Measurements from inside of panels