Liberty Instructions

2
Be sure the measurement between the panel
edge and the trim is the same along the entire
length. Then secure with one 2" nail in the upper
corner (Fig.D).
Nail along the panel edge into the trim using 2"
nails spaced 6" apart.
Secure the frontwall frame using two 3" screws
(Fig.E).
Screw through the frontwall trim into the top
and bottom plates using one 3" screw (Fig.F).
Repeatprocesstosecuretherightsideof
the frontwall.
3
Center frontwall on oor side-to-side.
The sidewall soft will overlap the
frontwall 3/8" (Fig.A).
Nail the frontwall ush to the oor using
2" nails 6" apart. Angle nails to hit oor
frame (Fig.B).
Nail the lower sidewall corner to the
frontwall trim with one 2" nail (Fig.C).
1
BEGIN
Stand frontwall on oor.
It is important to secure the frontwall in the following order.
6"
(15 cm)
2"(5cm)
Nail
6"
(15 cm)
Same
Measurement
Side
Panel
Fig.D
Trim
2"(5cm)
Nail
50
2" (5 cm)
3" (7,6 cm)
FRONT WALL INSTALLATION
x8
x36
DOOR
Fig.E
3"(7,6cm)
Screw
3"(7,6cm)
Screw
3"(7,6cm)
Screw
Fig.F
3"(7,6cm)
Screw
2x3"
CENTER
6"
(15cm)
6"
(15cm)
2"(5cm)
Nail
Fig.C
Trim
2"(5cm)
Nail
Fig.B
Fig.A
Trim
Panel
Soft
Panel
3/8"(0,9cm)OVERLAP