Liberty Instructions

42
2" (5 cm)
PARTS REQUIRED:
3/8 x 48 x 72"
(1 x 122 x 183 cm)
48"
(122 cm)
3/4"
(19 mm)
3/4"
(19 mm)
x2
x58
3/4"
GAUGEBLOCK
10' x 12' SIDE WALL PANELS
BEGIN HERE
6" (15 cm)
12" (30 cm)
Forsquarenessmaintain3/4"and
ushundersoftpanel.
DOOR
3/4"GaugeBlock
Fig.A
Fig.B
3/4"
(19 mm)
3/4"
(19 mm)
2 Nails
2 Nails
Place the 48x72" panel onto wall frame with primed side up as shown. Note the lip and
square edges.
Use the gauge block to mark the 3/4" measurement on the wall stud. Locate the panel
ush under the soft panel. Secure panel with two 2" nails in the corners (Fig.A).
8
7
6
Nail the panel using 2" nails 6" apart on edges
and 12" apart inside panel.
Ensureyourwallframeissquarebyinstallingonepanelandsquaringframe.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-
side until you have a 3/4" measurement on the wall stud. Secure corner with two 2" nails.
LIP
EDGE
SQUARE
EDGE
Flush
Flush
Do not nail
ingroove.
There will be an
overhangattop.
Primed Side
UP