Installation Guide

49
Center sidewall on oor front to
back.
Nail the lower sidewall corner to
the backwall trim with one
2" nail (Fig. A).
At the top of the sidewall the
soft panel will overlap the
backwall panel 3/8" (Fig. B).
3
Nail down the bottom plate using two 3" nails
between the wall studs.
Screw through the backwall trim into the top and
bottom plates using 3" screws (Fig. E).
Repeat process to secure the left sidewall.
1
2
BEGIN
2" (5 cm)
3" (7,6 cm)
3" (7,6 cm)
SIDE WALLS INSTALLATION
Be sure the measurement between the
panel edge and the trim is the same
along the entire length. Then secure
with one 2" nail in the upper corner
(Fig. C).
Nail along the panel edge into the trim
using 2" nails spaced 6" apart.
Nail along bottom of panel using 2"
nails 6" apart. Angle nail to hit oor
frame (Fig. D).
Stand right sidewall on oor.
It is important to secure the sidewall in the following order:
Additional fasteners needed for 10' x 12' kit or 10' x 16' kit. Same instructions apply.
DOOR
DOOR
x4/8/12 x2
x30/39/48
6"
(15 cm)
6"
(15 cm)
CENTER
2" (5 cm)
Nail
Fig. A
Trim
Fig. D
Fig. E
3" (7,6 cm)
Screw
2x3"
3" (7,6 cm)
Nail
Panel
Same
Measurement
Fig. C
Trim
2" (5 cm)
Nail
DOOR
3" (7,6 cm)
Screw
3/8" (0,9 cm)
OVERLAP
Fig. B
Trim
Panel
Soft
Panel