Installation Guide

DOOR
47
2" (5 cm)
PARTS REQUIRED:
x238
3/8" x 48" x 72"
(1 x 122 x 183 cm)
x6
10' x 16 ' SIDE WALL PANELS
DOOR
Place 48" panels on frame as shown with primed side facing up.
NOTE THE SQUARE AND LIP EDGES.
Nail using 2" nails 6" apart on edges and 12" apart inside panel.
8
Do not nail
in groove.
Carefully  ip your sidewall over.
Repeat STEPS 1-9 to assemble your second side wall.
You have  nished building both of your side walls. Go to page 46.
FINISH
10
Flush
6" (15 cm)
48"
(122 cm)
48"
(122 cm)
48"
(122 cm)
12" (30 cm)
LIP
EDGE
SQUARE
EDGE
To draw panels
tight at seams
angle nail.