Installation Guide

20
PARTS REQUIRED:
10' x 16' FLOOR PANELS
(Not Included)
x55
2" (5 cm)
DOOR
Position the 48 x 96" panel with the rough side up (painted-grid lines side)
with the 96" edge and corner ush to the oor frame and Section 1.
Secure the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
2
BEGIN
1
48" x 96"
(122 x 244 cm)
x1
6" (15 cm) edges of panel
120"
(305 cm)
96"
(244 cm)
12" (30,5 cm)
inside panel.
Grid lines
U P.
48"
(122 cm)
Flush
92-5/8"
(235 cm)
3/4" (19 mm)
Approximately
Section 2
Section 1
FLOOR PANELS NOT
INCLUDED. SEE PAGE 8
FOR PANEL SIZES
AND QUANTITIES.