Liberty Instructions

6
10x8' 10x12'
10x16'
ALL SIZES
COMPLETING YOUR SHED
You will need these additional materials
OPTIONAL MA TERIALS
ADDITIONAL MA TERIALS
REFER TO THE BACK OF THIS MANUAL AND THE MANUF ACTURER’S INSTRUCTIONS
FOR INST ALLA TION OF SHINGLES, DRIP EDGE AND FEL T.
3-TAB SHINGLES (Bundles)....................
PAINT FOR SIDING (Gallons)..................
Use 100% acrylic latex exterior paint.
1" GALVANIZED ROOFING NAILS (lbs).
For shingles.
PAINT FOR TRIM .............................1 Quart
Use 100% acrylic latex exterior paint.
WOOD GLUE ....................... Exterior Rated
CAULK ............................................ 2 Tubes
Use acrylic latex exterior caulk that is paintable.
FOUNDA TION OR FLOOR MA TERIALS
• Your shed kit does not include a wood floor frame or floor panel materials.
• See page 8 for the additional
oor panel sizes and quantities required.
• This shed does not include any leveling materials.
• See the FLOOR LEVELING section on page 10 for recommended methods and suggested materials to properly level your
oor, as this will vary depending on your speci c site.
NOTES
468
1-½ 2 2-½
2
3
4
(2) coats recommended.
10x8' 10x12'
10x16'
DRIP EDGE (Feet)....................................
#15 ROOFING FELT (Sq ft. to cover).....
1" GALVANIZED ROOFING NAILS(lbs).
40 50
60
96 144
192
¼¼
½
For r ng felt.
Shown actual size
NAIL BOXES (Not included)
3" (7,6 cm)
2" (5,0 cm)
x2 BOXES
x4 BOXES