Installation Guide

60
1"
(2,5 cm)
NAILS
Sealing Strip
1"
(2,5 cm)
1/2"
(1,3 cm)
NOTE: 10' x 8' Gable Shown
• Follow directions provided by manufacturer and these instructions.
3().',%3
Ø-.3Ø(-"+4#$#Ø
Install first starter row upside down and color up with a 1" overhang at back and bottom of roof panel. Use (4) nails per shingle.
Starter row must be straight and level all the way across with lower edge of roof deck.
NOTE: If you have installed drip edge install shingles flush to drip edge.
BEGIN
1
TABS UP
Shingle overlaps
roof decking.
1" (2,5 cm) overhang or
flush with drip edge.
(4) Nails
BACK OF
SHED
FRONT OF
SHED
NEVER DRIVE FASTENERS INTO OR ABOVE SEALING STRIPS.
Familiarize yourself with a 3-Tab Shingle.
1" (2,5 cm) overhang
past roof deck.
3().',%.!),0!44%2.
Full Rain Slot
Half A Rain Slot
Notch
Notch