Installation Guide

55
GABLE 10' x 8'
GABLE 10' x 12'
CENTER CENTER
CENTER
CENTER
Two Screws
DOOR
Secure hinge boards from inside using 3/4" screws as shown (Fig. A).
Center trim ZJ over doors and secure using eight 2" fi nish nails into framing as shown.
Center metal threshold between doors and secure using eleven 3/4" special
coating screws into fl oor as shown (Fig, C).
Reinforce the door trim using 3/4" screws through door panel into trim (Fig. A).
Locate screws as shown in Fig. B. Use two screws at seams.
3/4" (19 mm)
3/4" (19 mm)
ZJ
You have fi nished securing your door and trim.
PARTS REQUIRED:
5/8 x 3 x 72" (1,6 x 7,6 x 183 cm)
x1
x8 x58
x11
2" (5 cm)
FINISH
5
3
4
2
1
64" Metal Threshold
x1
Bagged separately/
special coating
Center
Install 3/4" screws
from inside.
(11) Special
coating screws
x6
2" Nails x8
Fig. B
Fig. C
14" (35,5 cm)
Approximately
Nail into
framing.
Door
Trim
Fig. A
Door
Panel
ZJ
$//2
BEGIN
Hinge
Board