Installation Guide

53
DOOR
Orient parts as shown on flat surface. 3/8" offset is to top. Look for red
(right) and green (left) on hinge board.
PARTS REQUIRED:
x1x1
Left Door Right Door
BEGIN
1
DOORS
1-1/4" (3 cm)
2
Attach temporary support OO using 3" screws with 3/4" (1,9 cm) gap from right
edges (Fig. A) and at ends. Tighten securely.
Attach temporary support GAA at bottom with 1-1/4" screws (Fig. A). Tighten
securely.
HINT:
Look for 3/8" SPACER
attached to doors.
Fig. A
GAA
OO
Make sure spacer
is attached.
Tighten screws
securely.
OFFSET
(4) 3" (7,6 cm)
Screws
Bottom edges
ush.
3/8"
(1 cm)
3/8"
(1 cm)
3/8"
(1 cm)
3/8"
(1 cm)
OFFSET
GREEN RED
3" (7,6 cm)
OO
x1
x2
x4
2 x 3 x 69" (5 x 7,6 x 175,3 cm)
NOTE:
Screw hole
will be
used later.
3/4"
(1,9 cm)
3/4"
(1,9 cm)
1 x 3 x 5" (2,5 x 7,6 x 12,7 cm)
x1
GAA
(2) 1-1/4" (3 cm) screws
12"
(30,5 cm)
12"
(30,5 cm)
GABLE 10' x 8'
GABLE 10' x 12'