Installation Guide

46
22-1/4"
(56,5 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
22-1/4"
(56,5 cm)
24"
(61 cm)
RAFTER INSTALL 10' x 12'
3" (7,6 cm)
Locate rafters directly over studs and flush to overhang in wall frame
(Fig. A).Check that you have the measurements shown. Screw through soffit
panel into rafters using one 2" screw (Fig. A).
Repeat steps to attach (5) rafters.
Attach with two 3" screws at each end (Fig. B). Re-tighten 2" screws if neccessary.
You have attached your rafters. Go to page 48.
Flush
1
PARTS REQUIRED:
pre-assembled
x5
x20
x10
Screw into top
plate.
2" (5 cm)
2" (5 cm)
Screw
Fig.A
1" (2,5 cm)
Fig.
DO
O
R
NOTE: Measurements from inside of panels
FINISH
4
3
2
Maintain the measurements between rafters.
BEGIN
B
Align over studs.
GABLE 10' x 8' GABLE 10' x 12'