Installation Guide

43
GABLE 10' x 8'
GABLE 10' x 12'
NOTE: 10' x 8' Gable Shown
FINISH
4
Position one CD fl ush to front panel edge and center on right edge of
groove (Fig. A). Attach trim with eight 1-1/4" screws from inside. Install
two screws at seam (Fig. B).
Position second CD fl ush to panel edge and fl ush to CD already attached (Fig. A).
Attach trim with eight 1-1/4" screws from inside. Install two screws at seam (Fig. B).
Repeat steps 1-2 to attach the back trim.
You have attached your upper trim. Continue to attaching your endcaps.
2
3
BEGIN
¸
1
Fig. A
Fig. B
8" (20,3 cm)
Approximately
1-1/4" (3 cm)
Flush to top
of panel.
'!",%42)-
PARTS REQUIRED:
2 x 3 x 54-5/16" (5 x 7,6 x 138 cm)
x4
CD
Flush
CD
CD
x24
DOOR
Flush