Installation Guide
35
GABLE 10' x 8'
GABLE 10' x 12'
DO
O
R
Place 48" panel on frame as shown with primed side facing up.
NOTE THE SQUARE AND LIP EDGES.
Nail using 2" nails 6" apart on edges and 12" apart inside panel.
8
Carefully fl ip your sidewall over.
Repeat STEPS 1-9 to assemble your second side wall.
Do not nail
in groove.
You have fi nished building both of your side walls. Go to page 40.
FINISH
9
Flush
6" (15 cm)
48"
(122 cm)
12" (30 cm)
LIP
EDGE
SQUARE
EDGE
To draw panels
tight at seams
angle nail.
DOOR
2" (5 cm)
PARTS REQUIRED:
x58
3/8" x 48" x 72"
(1 x 122 x 183 cm)
x2
fXf3)$%7!,,0!.%,3