Installation Guide

26
GABLE 10' x 8' GABLE 10' x 12'
7).'7!,,0!.%,3
PARTS REQUIRED:
x2
x32
x2
LEFT
RIGHT
2 x 3 x 72" (5 x 7,6 x 183 cm)
x4
OY
1-1/4" (3 cm)
Flush
2-1/2"
(6,35 cm)
2-1/2"
(6,35 cm)
x2
x2
4
You will assemble TWO RIGHT and TWO LEFT wing walls.
Place OY on floor. Place a wing wall panel primed side down onto OY
(Fig. A) and flush to panel edges as shown.
3
2
1
Secure flush to edges using eight 1-1/4 screws 10" apart.
You have finished building two sets of wing wall assemblies. Set ONE LEFT and
ONE RIGHT aside. Continue building your back wall.
BEGIN
Use 2x3's
for support.
10" (25,4 cm)
Approximately
OY
Primed Side
Down.
Fig A.
Locate OY flush
to these edges.
DOOR