Installation Guide

2
Be sure the measurement between the panel
edge and the trim is the same along the entire
length. Then secure with one 2" nail in the upper
corner (Fig. D).
Nail along the panel edge into the trim using 2"
nails spaced 6" apart.
Secure the frontwall frame using two 3" screws
(Fig. E).
Screw through the frontwall trim into the top
and bottom plates using one 3" screw (Fig. F).
Repeat process to secure the right side of
the frontwall.
3
Center frontwall on oor side-to-side.
The sidewall soft will overlap the
frontwall 3/8" (Fig. A).
Nail the frontwall ush to the oor using
2" nails 6" apart. Angle nails to hit oor
frame (Fig. B).
Nail the lower sidewall corner to the
frontwall trim with one 2" nail (Fig. C).
1
BEGIN
Stand frontwall on oor.
It is important to secure the frontwall in the following order.
6"
(15 cm)
2" (5 cm)
Nail
6"
(15 cm)
Same
Measurement
Side
Panel
Fig. D
Trim
2" (5 cm)
Nail
50
2" (5 cm)
3" (7,6 cm)
FRONT WALL INSTALLATION
x8
x36
DOOR
Fig. E
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
Fig. F
3" (7,6 cm)
Screw
2 x 3"
CENTER
6"
(15 cm)
6"
(15 cm)
2" (5 cm)
Nail
Fig. C
Trim
2" (5 cm)
Nail
Fig. B
Fig. A
Trim
Panel
Soft
Panel
3/8" (0,9 cm) OVERLAP