Installation Guide

Right panel has square edge.
Left panel has lip edge.
29
1-1/4" (3 cm)
4
You will assemble TWO RIGHT and TWO LEFT wing walls.
Place OY on oor. Place a wing wall panel primed side down onto OY
(Fig. A) and ush to panel edges as shown.
3
2
1
Secure ush to edges using eight 1-1/4 screws 10" apart.
You have nished building two sets of wing wall assemblies. Set ONE LEFT and
ONE RIGHT aside. Continue building your back wall.
BEGIN
DOOR
Flush
2-1/2"
(6,35 cm)
2-1/2"
(6,35 cm)
x2
x2
Use 2x3's
for support.
10" (25,4 cm)
Approximately
OY
Primed Side
Down.
Fig A.
Locate OY ush
to these edges.
WING WALL PANELS
PARTS REQUIRED:
x32
2 x 3 x 72" (5 x 7,6 x 183 cm)
x4
OY
x2
x2
LEFT
RIGHT