Installation Guide

DOORS
CENTER CENTER
CENTER
CENTER
Center
Install3/4"screws
from inside.
x6
2" Nails x8
Fig.B
14" (35,5 cm)
Approximately
Nail into
framing.
Two Screws
Door
Trim
Hinge
Board
Fig. A
Door
Panel
WR
GI
GI
CENTER GI
CENTER GI
19/32 x 2-1/2 x 23" (1,5 x 6,3 x 58,4 cm)
GI
Center metal threshold between doors and secure using eleven 3/4" special
coating screws into oor as shown (Fig, C).
5
You have nished securing your door and trim.
FINISH
6
BEGIN
1
4
Secure two horizontal door rails GIwith 3/4" screws from behind to center of
doors as shown.
Secure hinge boards from inside using 3/4" screws as shown (Fig. A).
3
Center trim WR over doors and secure using eight 2" nish nails into framing as shown.
2
Reinforce the door trim using 3/4" screws through door panel into trim (Fig. A).
Locate screws as shown in Fig.B. Use two screws at seams.
(10) Special
coating screws
Fig. C
PARTSREQUIRED:
2" (5 cm) x8
x2
3/4" (1,9 cm) x58
x1
WR
19/32 x 3 x 63" (1,5 x 7,6 x 160 cm)
3/4" (1,9 cm) x10
Bagged separately / special coating
56" (142,2 cm) Metal Threshold
x1
40