Installation Guide

23
2" (5,1 cm)
PARTSREQUIRED(TEMPORARY):
x17
3" (7,6 cm)
x8
Use OO as a temporary brace. Secure with two 3" screws.
Center side wall assembly on the 92-1/2" (235 cm) oor dimension.
Ensure 1-1/2" measurement is on top
2
BEGIN
1
First, nail lower edge of panel to oor frame using 2" nails 6" apart.
Angle nail to hit oor frame (Fig. A).
3
Nail side wall bottom plate to oor using eight 3" nails.
(Nail two 3" nails between each stud through bottom plate)
4
5
You have nished standing your side wall.
Repeat steps 1-4 to stand second wall.
FINISH
92-1/2" (235 cm)
3" (7,6 cm)
Screws
Nail2"nailsrst.
Angle to nail into
oorframe.
2" (5,1 cm) Nail
Fig. A
1-1/2" overhang
3" Nails into bottom plate.
6"
15,2 cm
Flush
Flush
OO
x1
2 x 3 x 69" (5,1 x 7,6 x 175,3 cm)
TEMPORARYSUPPORT
OO
SIDE WALL INSTALLATION
D
O
O
R
D
O
O
R
3" (7,6 cm)
x2