Installation Guide

76
Okay if Shingle Overlaps.
Está bien si la teja so-
bresale.
Flush to dripedge
Nivelado al borde del gotero
1"
(2.5 cm)
NAILS
CLAVOS
Sealing Strip
1"
(2.5 cm)
1/2"
(1.3 cm)
6 Bundles/bultos
8 Bundles/bultos
Building Size Shingles Needed
Tejas necesarias
SHINGLES
(Not Included)
TEJAS
(No Incluidas)
Dimensiones del edicio
10’ x 10’
(305 x 305 cm)
10’ x 14’
(305 x 426,7 cm)
Clavos
Line up notch on top of Shingle with
edge of Roof to stagger the Shingles.
Alinee el corte encima de la teja con el
borde del techo para escalonar las tejas.
Flush to edge, stagger each row.
Nivele al borde, escalone cada la.
Maintain same deminsion across.
Mantenga la misma dimensión de
un lado al otro.
Remove overhanging shingles.
Quite tejas sobresalientes.
Install rst row backwards.
Instale la primera la al revés.