Installation Guide

DQ
LW
2 x 3 x 11-7/8" (2,5 x 7,6 x 30,2 cm)
2 x 3 x 17-1/2" (2,5 x 7,6 x 44,5 cm)
2 x 3 x 23-7/8" (2,5 x 7,6 x 60,6 cm)
x11
5
PARTS IDENTIFICATION AND SIZES
TRUSS
TRIM
WALL
6 x 24" (15,2 x 61 cm)
x6
PARTS LIST
INVENTORY YOUR PARTS before you begin.
We suggest sorting parts by the category they are listed in.
WOOD SIZE CONVERSION CHART
Nominal Board Size Actual Size
1" x 4".................3/4" x 3-1/2" (1,9 x 8,9 cm)
2" x 4"..............1-1/2" x 3-1/2" (3,8 x 8,9 cm)
2" x 3"..............1-1/2" x 2-1/2" (3,8 x 6,3 cm)
1" x 3".................3/4" x 2-1/2" (3,8 x 6,3 cm)
x2
x2
x2
x2
1 x 2 x 14" (2,5 x 5,1 x 35,6 cm)
1 x 2 x 11" (2,5 x 5,1 x 27,9 cm)
BV
WQ
WO
x1
2 x 3 x 66-1/2" (5,1 x 7,6 x 168,9 cm)
FZ
x4
2 x 3 x 92-1/2" (5,1 x 7,6 x 235 cm)
PNA
x2
2 x 3 x 96" (5,1 x 7,6 x 243,8 cm)
PT
x4
x4
2 x 4 x 54-1/16" (5,1 x 10,2 x 129,8 cm)
x6
WI
2 x 3 x 34" (5,1 x 7,6 x 86,4 cm)
x2
CI
stamped on some parts.
• Check these locations for part stamp.
RS
RS
x1
2 x 3 x 91 " (5,1 x 7,6 x 231,1 cm)
PS
DOOR
FLOOR
x2
2 x 4 x 93" (5,1 x 10,2 x 236,2 cm)
x5
2 x 4 x 92-1/2" (5,1 x 10,2 x 235 cm)
TREATED
TREATED
2 x 3 x 55-3/4" (5,1 x 7,6 x 141,6 cm)
3/8 x 1-3/4 x 71-1/4" (1 x 4,4 x 181 cm)
3/8 x 1-3/4 x 71-3/4" (1 x 4,4 x 182,2 cm)
x4
WX
1 x 3 x 5" (2,5 x 7,6 x 12,7 cm) GAUGE BLOCK FOR 3/4" (1,9 cm) MEASUREMENT
x1
GAA
3/4"
(1,9 cm)
5
Treated lumber is stamped:
Treated lumber is stamped:
OO
WR
x2
x1
19/32 x 3 x 63" (1,5 x 7,6 x 160 cm)
2 x 3 x 69" (5,1 x 7,6 x 175,3 cm) Finger Jointed