Installation Guide

47
SHINGLES - RIDGE CAP
• You will fi nish off the top of the roof with a ridge cap made from shingles.
Note: • You will need about 20 - 22 cut pieces.
Cut shingles into THREE pieces. Hint: Use cut-off pieces fi rst.
Score shingle,
then snap-off angled cut.
Install fi rst ridge cap fl ush to shingles at front, as shown.
Install second ridge cap 5" back, as shown.
2
3
BEGIN
1
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
Top of slot.
Weather Seal
Flush
(1) Nail per side through weather seal.
(1) Nail per side through weather seal.
5"
12,7 cm
FRONT OF
SHED
FRONT OF
SHED
Flush
20 to 22
Pieces