Installation Guide

D
O
O
R
DOOR
BEGIN
CENTER CENTER
CENTER
CENTER
Secure hinge boards from inside using 3/4" screws as shown (Fig. A).
Center trim WR over doors and secure using eight 2"  nish nails into framing as shown.
Reinforce the door trim using 3/4" screws through door panel into trim (Fig. A).
Locate screws as shown in Fig. B. Use two screws at seams.
3/4" (1,9 cm)
3/4" (1,9 cm)
You have  nished securing your door and trim.
PARTS REQUIRED:
x8 x58
x10
2" (5,1 cm)
FINISH
5
3
2
1
Center
Install 3/4" screws
from inside.
x6
2" Nails x8
Fig. B
14" (35,5 cm)
Approximately
Nail into
framing.
Two Screws
Door
Trim
Fig. A
Door
Panel
Hinge
Board
WR
WR
x1
19/32 x 2-1/2 x 63" (1,5 x 6,4 x 160 cm)
Center metal threshold between doors and secure using ten 3/4" special coating
screws into  oor as shown (Fig, C).
4
(10) Special
coating screws
Fig. C
Bagged seperately / special coating
Nail 1/2" from
bottom
40