Installation Guide

26
RAFTERS
2" (5,1 cm)
PARTS REQUIRED:
6 x 24" (15,2 x 61 cm)
x6
x72
OO
x1
2 x 3 x 69" (5,1 x 7,6 x 175,3 cm)
TEMPORARY SUPPORT
Fit base of rafters in corners
of back wall.
96”
(243,8 cm)
GUSSET x2
1/4" gap (6 mm)
Center
Glue
Glue
You will build THREE assemblies;
Place two rafter-halves WI in the corner of back and side walls.
Rafters contact at peak.
BEGIN
1
Temporary support (OO)
HINT:
Use fl oor and walls to help
assemble rafters!
2" (5 cm)
Apply glue to rafters where the gusset will fi t.
Contact at peak
Contact at peak
2
Nail gusset to rafters using twelve 2" nails in pattern shown.
3
Flip over rafter assembly and repeat STEPS 2-3 to attach second gusset to other side.
4
Repeat STEPS 1-4 to build TWO additional rafter assemblies.
5
Flush
FINISH
6
You have fi nished assembling
your rafters.
2 x 4 x 54-1/16" (5,1 x 10,2 x 129,8 cm)
x6
WI