Installation Guide

24
24
2" (5,1 cm)
PARTS REQUIRED:
x19
SIDE WALL INSTALLATION
Set back wall on side wall top plates and secure using two 3"
screws on each side (Fig.A).
1
Nail lower edge of panel to  oor frame using 2" nails 6" apart.
Angle nail to hit  oor frame (Fig. B).
2
Secure back wall upright to  oor using two 3" screws (Fig. C).
3
6
You have  nished standing your back wall.
FINISH
6"
(15,2 cm)
6"
15,2 cm
Nail 2" nails  rst.
Angle to nail into
 oor frame.
2" (5,1 cm)
Nails
Fig. B
Fig. C
Fig. D
1-1/2"
(3,8 cm) Nails
Fig. A
4
x26
1-1/2" (3,8 cm)
Nail back wall panel to side wall stud using thirteen 1-1/2"
nails at 6" apart.
Secure back wall center horizontal 2 x 3" using two 3" screws into back
wall frame at an angle as shown (Fig. D).
5
It is important to secure the
side wall in the following order:
BEGIN
(2) 3" (7,6 cm)
Screws
(2) 3" (7,6 cm)
Screws
Flush
x10
3" (7,6 cm)
(2) 3" (7,6 cm)
Screws
D
O
O
R
6"
15,2 cm
1-1/2" (3,8 cm)
Nails