Installation Guide

26
RAFTERS
2" (5,1 cm)
PARTS REQUIRED:
6 x 24" (15,2 x 61 cm)
x6
x72
Fit base of rafters in corners
of back wall.
96”
(243,8 cm)
GUSSET x2
1/4" gap (6 mm)
Center
You will build THREE assemblies;
Place two rafter-halves WI in the corner of back and side walls.
Rafters contact at peak.
BEGIN
1
Temporary support (OO)
HINT:
Use  oor and walls to help
assemble rafters!
2" (5 cm)
Contact at peak
Contact at peak
Nail gusset to rafters using twelve 2" nails in pattern shown.
2
Flip over rafter assembly to attach second gusset to other side.
3
Repeat STEPS 2-3 to build TWO additional rafter assemblies.
4
Flush
FINISH
5
You have  nished assembling
your rafters.
2 x 4 x 54-1/16" (5,1 x 10,2 x 129,8 cm)
x6
WI
TEMPORARY SUPPORT
OO
x1
69" Door Stiffener (175,3 cm)