Installation Guide

2" (5,1 cm)

PARTS REQUIRED:

FRONT WALL INSTALLATION

Center front wall assembly on oor, resting top plate on side walls.

Secure front wall top plate to side walls using two 3" screws (Fig. A, B).

Secure lower edge of panel to oor frame using eight 2" nails 6" apart.

Angle nail to hit oor frame (Fig. C).

Secure bottom plates with three 3" nails on each side (Fig. C).

You have nished standing your walls.

FINISH

Nail front wall to side walls using 1-1/2" nails 6" apart (Fig. D).

3" (7,6 cm)

x26

1-1/2" (3,8 cm)

It is important to secure the

front wall in the following order:

BEGIN

FlushFlush

Center wall assembly on

Maintain 56” dimension

oor.

(2) 3" (7,6 cm)

Screws

Fig. A

Fig. B

Nail 2" nails rst.

Angle to nail into

oor frame.

Fig. C

2" (5,1 cm) Nails

3" (7,6 cm) Nails

1-1/2" (3,8 cm)

Nails

Fig. D

3" (7,6 cm)