Installation Guide

PARTS REQUIRED:
FLOOR FRAME (NOT INCLUDED)
3" (7,6 cm)
x5
2 x 4 x 96" (5,1 x 10,2 x 243,8 cm)
x2
2 x 4 x 92-5/8" (5,1 x 10,2 x 235,2 cm)
TREATED
TREATED
92
5
8
" [235.2 cm]
16"
[40.6 cm]
32" [81.3 cm]
48" [121.9 cm]
64" [162.6 cm]
80" [203.2 cm]
96"
[243.8 cm]
93"
[236.2 cm]
Flush
at ends.
Flush
at ends.
x28
HINT:
For easier nailing
stand on frame.
• FOR 10' x 12', SKIP TO PAGE 16
Center
on marks.
Center
on marks.
You have nished your oor frame. Proceed to level and square frame.
BEGIN
1
Orient parts as shown on at surface. Measure and mark each
dimension from end of boards
2
Use two 3" nails at each mark
FINISH
3
DOOR
Floor framing materials
not included. See page 4
for sizes and quantities.
8