Installation Guide

57
3/8"
(9,5 mm)
3/8"
(9,5 mm)
3/4"
(19 mm)
PARTS REQUIRED:
x1
x1
7/16 x 18 x 96” (1,1 x 46 x 244 cm)
7/16 x 18 x 48" (1,1 x 46 x 122 cm)
x28
2" (5 cm)
3/4" GAUGE
BLOCK
Attach 18 x 96" panel as shown fl ush to panels and 3/4" on rafter (Fig. A) and
with 3/8" at the gable trim (Fig. B).
Attach 18 x 48" roof panel fl ush to panels and with the 3/8" measurement on
trim (Fig. B) and with 3/8" at the gable trim (Fig. C).
Nail the roof panels using 2" nails 6" apart on edges and 12" apart inside
panel.
6
FINISH
7
You have fi nished installing your roof panels.
Fig. A
Fig. C
Fig. B
Flush
Flush
96"
48"
Flush
ROOF PANELS