Installation Guide

51
2-1/2"
(6,4 cm)
PARTS REQUIRED:
Attach RK at back corner of workbench into outside trim, using 3" (7,6 cm)
screws, as shown.
Attach pegboard at top using (13) 1" (25 mm) screws as shown.
Place pegboard onto workbench with 1 x 3 Trim to bottom, facing out.
Anchor bottom of pegboard, using one 2" (5 cm) screw at center, and 3" (7,6 cm)
screws at lower corners.
You have fi nished your pegboard. Proceed to attach your shelf .
3
2
4
3" (7,6 cm)
x4
x2
x1
x13
x1
2" (5 cm)
BEGIN
¸
1
Window
Flush
Window
2 x 3 x 13" (5 x 7,6 x 33 cm)
RK
1" (25 mm)
3" (7,6 cm)
FINISH
5
2" (5 cm)
Screw
1 x 3
Trim to bottom
(13) 1" (2,5 cm)
Screws across top
3" (7,6 cm)
Screws
8"
Approximately
RK
PEGBOARD