Installation Guide

46
PARTS REQUIRED:
2" (5 cm)
x22
x1
5/8 x 3-7/8 x 96" (1,6 x 9,8 x 244 cm)
FINISH
4
Position support fl ush with bottom edge of top plate and
side wall panel and attach with 2" (5 cm) nails as shown.
Remove temporary brace after support is installed.
Use exterior-rated wood glue behind support. Apply to
top plate and end of rafter
You have fi nished your door frame support.
2
3
BEGIN
¸
1
Door opening
Remove
After door
Frame support
Is attached
Flush
Glue
Flush
Flush
DOOR SUPPORT
6"
(15,2 cm)