Installation Guide

40
101-3/8”
257,5 cm
NU
GLUE
2 x 4 x 65-5/8" (5 x 10 x 167 cm) Rafter
2 x 4 x 46-13/16" (5 x 10 x 119 cm) Rafter
AD
x5
x10
x5
8 x 24" (20 x 61 cm) Gusset
2" (5 cm)
x120
Short edge to
metal plate side
Short edge
to this side
Ends
touch
FINISH
6
You will assemble (5) rafters. Place rafter parts on Jig as shown.
You have fi nished building your rafters.
BEGIN
¸
1
PARTS REQUIRED:
NU
NU
Gusset
AD
AD
RAFTERS
Apply glue to rafters where the gusset will fi t. Note short side of gusset. (Fig. A)
2
Ends of rafters must touch together at the peak. Nail gusset to rafters using twelve 2"
nails in pattern shown.
3
Flip over rafter assembly and repeat STEPS 2-3 to attach second gusset to other side.
4
Repeat STEPS 1-4 to build FOUR additional rafter assemblies.
5
Fig. A
1/4" Gap
(6 mm)